The new Buster M also converts for angling
The new fourth-generation Buster M is an aluminium boat that is 4.86 metres long and designed for five persons.Its engine power range is 30–40 hp. With the fishing package, the boat’s total weight including the engine is just slightly over 500 kg, making it an easy one to haul on a non-braked trailer.
“By adding this package, you can convert your Buster M or Buster S into a modern and practical fishing boat that is particularly well suited for angling. Both models are easy to move; however, the Buster M, which is almost 50 cm longer, clearly has the feel of a bigger boat to it,” says Jani Ollikainen, a fishing guide who was involved in the development of the accessories package.
The fishing accessories package of the Buster M and Buster S features a rod box, a fishing platform with a fishing seat and a rack for the trolling motor. The components can be acquired separately, and the equipment can be removed when converting the boat for other uses.
The new fishing accessories for the Buster M are available for a closer look at the revamped fishing section of the Helsinki International Boat Show 2018. Fishing guide Jani Ollikainen will be there to present the boat throughout the event. The boat show will be open for public between 9 and 18 February 2018.
The new fishing boat will also be on display in at the Sportfiske (Sport Fishing Show) between 16 and 18 March.
More practical and spacious rod box – added space and comfort on the fishing platform
With the fishing accessories, Buster’s bow box expands into a good-sized fishing platform. The platform provides fishermen with elevated deck space to improve visibility and facilitate angling. Under the fishing platform there is ample storage space for camping gear and fishing tackle to keep them out of the way during the action. The storage compartments are accessed via two large hatches positioned at the rear end of the fishing platform.
The front end of the fishing platform houses not only the bow box, which comes as standard in the Buster M, but also a separate storage compartment for boating gear such as anchors and fenders. The fishing platform features a removable high-quality fishing seat.
An additional – slightly smaller – fishing platform can be created by detaching the integrated canvas garage. Then the aft bench and the swim platforms will be on the same level and can be used for fishing.
The long rod box attaches onto the port side of the boat.The twin-console version of the Buster M comes standard with the short rod box placed in front of the left console.
“The rod box is really spacious and easy to use. Pike fishers, for example, most commonly use rods that are 8.5 feet long, and you can easily fit 5–6 such sets including the reels in the box. It is easy to line up the rods on the box cover for fishing,” Ollikainen explains.
The rod box provides practical additional storage space for other gear as well, which comes in handy during the trip to the cabin and back, for example.
The trolling motor rack, mounted slightly to the side of the boat's centre line, will leave plenty of tread area on the bow deck to facilitate access to the boat. Additionally, on the outside of the rack there is also a new mounting place for a rope cleat, so as to protect not just the rope cleat but also the trolling motor.
“The small trolling motor is handy and easy to use when moving through reeds where pikes can be found and when manoeuvring around rocks,” Ollikainen says.
Light and easy to haul
The new Buster M with the optional fishing accessories package weighs 413 kg. The recommended engine is the Yamaha F40F that generates impressive torque and is economical to use. The Buster M comes in two versions: the single-console M1 and the twin-console M2.
The smaller Buster S with the optional fishing accessories included weighs only 308 kg, and its recommended engine power range is 20–30 hp. The boat works best with Yamaha's new F25G engine that weighs just 60 kg.
The Buster S is available in three versions: the S that is tiller-steered on the aft seat; the S1 with a side console; and the Scc with a centre console.
The fishing accessories package can be retrofitted to all Buster M versions of the 2018 model year and all Buster S versions beginning from the 2017 model year.
Buster M 2018
- Length 4.86 m
- Beam 1.85 m
- Weight with fishing accessories package 431 kg
- Max. number of persons 5
- Engine power range 30–40 hp
Buster S 2018
- Length 4.43 m
- Beam 1.82 m
- Weight with fishing accessories package 308 kg
- Max. number of persons 4
- Engine power range 20–30 hp
Keywords
Contacts
Anders KurténDirector, Product Development
Tel:+358 50 327 1272anders.kurten@busterboats.comImages
Links
About Buster Boats
Buster Boats is the largest designer and manufacturer of aluminium boats in Europe. The majority of the more than 125,000 aluminium boats we have launched on the world’s waters over the past 60 years are still in use.
Boats carrying the Buster name have been produced since 1976, but Buster’s history began with the first Kello boat manufactured in 1955.
The Buster range includes 20 boats, of which the under four-metre Buster Mini and the almost ten-metre Buster Phantom are the smallest and largest, respectively. More than half of all boats manufactured are exported.
The manufacturer of Buster boats, Inhan Tehtaat Oy, is a subsidiary of Yamaha Motor Europe. Buster Boats boat production is located in Ähtäri, Finland while the company's headquarters and R&D facilities are located in Raisio, southern Finland.
Subscribe to releases from Buster Boats
Subscribe to all the latest releases from Buster Boats by registering your e-mail address below. You can unsubscribe at any time.
Latest releases from Buster Boats
Buster S får dubbla konsoler – nu kommer den fjärde versionen av den populära aluminiumbåten24.11.2022 11:00:11 EET | Pressmeddelande
Buster S är en storfavorit bland mindre aluminiumbåtar, och inför båtsäsongen 2023 lanseras den fjärde versionen av modellen. Den nya Buster S2 är gjord för fyra personer och är utrustad med dubbla konsoler med en solid dörr emellan.
Mökkirantojen suosikkiveneestä neljäs malliversio: Buster S saa tuplapulpetit24.11.2022 11:00:10 EET | Tiedote
Pienten alumiiniveneiden suursuosikki Buster S saa veneilykaudelle 2023 neljännen malliversion. Uusi Buster S2 on tuplapulpeteilla ja kiinteällä väliovella varustettu, neljälle hengelle suunniteltu alumiinirakenteinen monikäyttövene.
Buster S får doble konsoller – fjerde versjon av den svært populære småbåtmodellen i aluminium24.11.2022 11:00:09 EET | Tiedote
Buster S, en stor favoritt blant små aluminiumsbåter, får en fjerde modellversjon for sesongen 2023. Den nye Buster S2 er en flerbruks aluminiumsbåt designet for fire personer og utstyrt med doble konsoller og en solid dør i midten.
Buster S gets double consoles – fourth version of the highly popular small aluminium boat model24.11.2022 11:00:09 EET | Press release
The Buster S, a big favourite among small aluminium boats, gets a fourth model version for the 2023 boating season. The new Buster S2 is a multipurpose aluminium boat designed for four people and equipped with double consoles and a solid door in the middle.
Miten moottoriveneellä ajaessa voi säästää polttoainetta?21.6.2022 08:03:03 EEST | Tiedote
Taloudellisuus on tärkeä päämäärä Buster-alumiiniveneiden suunnittelussa. Kaikkein ratkaisevin tekijä löytyy kuitenkin kaasukahvan vierestä, sillä ajotapa vaikuttaa veneen kulutukseen vielä paljon rajummin kuin autossa.
In our pressroom you can read all our latest releases, find our press contacts, images, documents and other relevant information about us.
Visit our pressroom